[QUOTE]Денис Петренко пишет:
However, file was received...
Select "Трассы" in ProjectTree and check layer "Проект" in the bottom of Object Inspector
(see screenshot).


It's defines, how Z-values of some "flat" objects will be calculated.
[/QUOTE]Thank you very much. Good luck.



[FILE ID=15851]

https://www.youtube.com/watch?v=iEKR9a2wuNI&feature=youtu.be

[QUOTE]Денис Петренко пишет:
Please, send your project file to support@indorsoft.ru. We'll look and give an answer.
[/QUOTE]This address did not receive my file. :(

it is indorcad9. but I can't show semi-trailer on the 3d. What is problem?
I used Indorcad- 8 on this project.

[QUOTE]Денис Петренко пишет:
It's new program for modelling typical culverts and making their drawings. Now existing only for internal usage. Some later (aprox. autumn 2014) we'll publish it.
[/QUOTE]good luck.

where is "Indorculvert 9" ? How do I take?

[QUOTE]Денис Петренко пишет:
Posted...
[/QUOTE]


Thank you
I have two questions.
1.Why didn't traffic light add as the left and right addition sections?
2. How to make pier of traffic light?

[QUOTE]Денис Петренко пишет:
Posted
[/QUOTE]Thanks, I did see it,

[QUOTE]Денис Петренко пишет:
It's not so hard. We'll add horizontally oriented traffic light this week. Wait for it in automatic updates ...
(3D-объекты -> Автомобильные дороги -> Светофор (горизонтальный))
[/QUOTE]thank you very much. I'm waiting...

[QUOTE]Денис Петренко пишет:
Unfortunately, not all changes implements immediately. You can close and reopen form to view effects.
[/QUOTE]Thanks.
1. Can make traffic light horizontally in this programme?
2. Not seeing traffic light in the (вид-3d вид)
Are there any easy methods to decide?

hello
How is include traffic light /светафор/ on Indorcad?

[QUOTE]Денис Петренко пишет:
Bat MGL, coordinates of you projects are very large (it seems to be about 10 millions). May be X or Y or both.
If you transform (move) project (Проект / Трансформация проекта) to "zero zone" the problem will be solved.
[/QUOTE]thanks,

Hello, Admin
These white line (разметка) are seeing in the 3D as zigzag.What do i do?

what is it?

[QUOTE]Денис Петренко пишет:
36%* for 2 years extended update [/QUOTE] -How much does it cost(dollar)?
[COLOR=#696969]-[/COLOR] How I pay a bill?

[QUOTE]Денис Петренко пишет:
You can use IndorCAD & IndorPavement for a long time without updates...
But if you want to continue updating IndorCAD & IndorPavement, you should pay:
- 24%* for 1 year or 36%* for 2 years extended update period (if pay before 16, April, 2014 only) - benefit price.
- 40%* for 1 year or 60%* for 2 years extended update period (if you pay after 16, April, 2014) - normal price.
* (of current product price )

Contact us to order extended update period.
[/QUOTE]
Hi
Today my update has stopped
1. Extend to continue
2. After Indorcad9 fully completed, purchase this newly
Which option of these above options is effectively to me?
If I choose to continue, can it work fully in new option of Indorcad9?  

How made pavement's color "black"?
I can't to paint color each sidewalk and carriageway and shoulder and "газон".  

hello
How is include traffic light /светафор/ on Indorcad?

[QUOTE]Денис Петренко пишет:
If you want to set Z-value of camera position in "Свободное перемещение" mode, press PgUp to move camera up or PgDown to move down.

In "Перемещение позиции камеры в плане" or "Задать положение камеры в плане" mode you can setup height of camera using mouse wheel with holded Ctrl or Shift key (only when sursor in under main view (plan)).

In "Проезд по трассе" mode keys PgUp and PgDown changes Z by 0.1 meter ( relative route surface )t[/QUOTE]thanks

[QUOTE]Ксения Лубкина пишет:
Bat MGL ,
Yes, the changes included in automatic updates.
[/QUOTE]thanks, It is Ok.

[QUOTE]Денис Петренко пишет:
You must DELETE (not deactivate) license with serial number "DRE-0553-...".
If you can't see serial "DRE-0553-..." - set CheckBox "Отображать все" in license manager.
It's obsolete and was replaced by "DRE-0214-...".

Try check for updates after deleting obsolete license...
[/QUOTE]
Today We have received your letter from post office.
Old series is DRE-0553-.., new series is DRE-0214-,,,, of the key  001-121,,, and
old series is DRM-0017-..., new series is  DRE-0454....of the key 001-119,,, written in this letter.
Now my current using key is 001-119,,,.and i did below action, but unfortunately it is impossible to activate. Therefore please help me to check it in your place.

[QUOTE]Денис Петренко пишет:
You have installed license for IndorCAD (DRE-0553-...).
Technical support (and updates) for license DRE-0553-... is expired. You can see this information on your picture below your ellipse mark.

While any license with expired updates period present at your computer, automatic updates can not to be dowloaded.[/QUOTE]
Sorry, we didn't understand. We have updated until 2013/03/16.But now you tell me that it is impossible to update. Now what we have to do?  

[QUOTE]Ксения Лубкина пишет:
Bat MGL ,
Yes, the changes included in automatic updates.
[/QUOTE]It is can't update. !?

[QUOTE]Ксения Лубкина пишет:
Bat MGL ,
Thanks for report , we will update the economic comparisons table
[/QUOTE]Did you change it?

[QUOTE]Ксения Лубкина пишет:
Bat MGL ,
>>I sent you pavement's file. Please check it.

I e-mailed you an example of proper optimization options in your project. Your search ranges were too wide.
[/QUOTE]Thanks,
One question.
I need cost "geosetka". I changed unit cost. But total cost doesn't change.

I changed"толщин, шаг". But it doesn't work. /оптимикация толщин кнопка/